Neoware c50 - Thin Client User Manual page 60
Neolinux 4.0 thin client user manual
Hide thumbs
Also See for Neoware c50 - Thin Client:
- User manual (484 pages) ,
- Quick start manual (9 pages) ,
- Specification (5 pages)
Table of Contents
Advertisement
Network Configuration
46
On-board WiFi
Operating Mode
Default: Managed (with access point or with roaming)
This should not be changed from the default setting, which allows
multiple connections.
Protocol
Default: Auto
This specifies the access point transmission speed and frequency
range. Depending on the access point, selecting Auto will cause it to
automatically detect the type of device and adjust the transmission
and frequency range accordingly.
Channel
Default: automatic
This enables you to specify the radio frequency which should be
used by the access point and the wireless adapter. The default auto-
matic setting usually works by automatically selecting the best
channel to use. However, you can use a specific frequency by select-
ing one of the channels 1 through 14 as listed in the following table:
1
2,412 USA FCC, Europe ETSI, Japan
2
2,417 USA FCC, Europe ETSI, Japan
3
2,422 USA FCC, Europe ETSI, Japan
4
2,427 USA FCC, Europe ETSI, Japan
5
2,432 USA FCC, Europe ETSI, Japan
6
2,437 USA FCC, Europe ETSI, Japan
7
2,442 USA FCC, Europe ETSI, Japan
8
2,447 USA FCC, Europe ETSI, Japan
9
2,452 USA FCC, Europe ETSI, Japan
10
2,457 USA FCC, Europe ETSI, Japan
11
2,462 USA FCC, Europe ETSI, Japan
12
2,467 Europe ETSI, Japan
13
2,472 Europe ETSI, Japan
14
2,484 Japan
Advertisement
Table of Contents
