Neoware c50 - Thin Client User Manual page 128

TeemTalk Connection Configuration
114 Creating a New TeemTalk Connection
Name
4
In the field at the top of the dialog, enter a descriptive
name for the TeemTalk connection. This will be used to identify
the connection to the user.
Network
5 On the
to connect to in the
6 Select the number of the port to use from the
7
Select the terminal emulation to use from the
8
Click on the tabs along the top of the dialog to access additional
setup options that you may wish to configure. Note that the
options available depend on the terminal emulation chosen in
Emulation
the field. Refer to the sections for each dialog tab
later in this chapter for details of the options available.
9
When you have finished configuring the TeemTalk connection,
OK
click .
An icon for the new TeemTalk connection configuration will be
Control Panel
displayed in the
desktop, and it will be listed for selection in the taskbar
Connection Manager
and the
If you need to change the configuration of a TeemTalk connection,
Control Panel
display the
on the relevant TeemTalk connection configuration icon.
tab, enter the name or IP address of the server
Address
field.
Connections
-
.
Connections
- window then double-click
Port
list.
Emulation
list.
window and on the
menu