Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-32DD200NA14 User Manual

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press TV-MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press
or OK. The CHANNELS menu opens.
3 Press or to highlight Audio Only, then
press OK.
4 Press or to select On.
5 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH or CH , your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
47
NS-32DD200NA14 Insignia 32" LED TV/DVD Combo
To automatically scan for channels:
1 Press TV-MENU. The on-screen menu opens.
2 Press
3 Press
then press OK. The CHANNELS · AUTO CHANNEL
SEARCH screen opens.
4 Press
Satellite Box, then press OK.
A If you select Antenna, your TV scans for
www.insigniaproducts.com
or to highlight CHANNELS, then press
or OK. The CHANNELS menu opens.
or to highlight Auto Channel Search,
or to highlight Antenna, Cable, or
available channels. The scan may take
several minutes.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.