Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-24DD220NA16 User Manual

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
1 Press TV-MENU.
2 Press or to highlight CHANNELS, then press
or OK.
3 Press or to highlight Audio Only, then press
OK or .
4 Press or to select On.
5 Press TV-MENU, OK, or
menu, or press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
56
to return to the previous
www.insigniaproducts.com
24"/28"/32" 720p 60Hz, LED DVD combo TV

Changing channel settings

This section covers:

• Automatically scanning for channels

• Hiding channels
• Setting up a favorite channel list
• Viewing a favorite channel
• Adding or changing a channel label
• Checking the digital signal strength
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press CH
or CH , your TV goes to the next or previous
channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
1 Press TV-MENU.
2 Press or to highlight CHANNELS, then press
or OK.
3 Press or to highlight Auto Channel Search,
then press OK or .
4 Press or to highlight Cable/Satellite Box,
Cable from the wall, or Antenna, then press OK.