Table of Contents
Advertisement
What your server offers
The server uses the following features and technologies:
v UEFI-compliant server firmware
v Integrated management module
v Remote presence capability and blue-screen capture
v IBM Dynamic System Analysis Preboot diagnostics programs
8
IBM System x3500 M3 Type 7380: Installation and User's Guide
®
IBM System x
Server Firmware (server firmware) offers several features,
including Unified Extensible Firmware Interface (UEFI) 2.1 compliance, Active
Energy Manager technology, enhanced RAS capabilities, and BIOS compatibility
support. UEFI replaces the basic input/output system (BIOS) and defines a
standard interface between the operating system, platform firmware, and external
devices. UEFI-compliant System x servers are capable of booting UEFI-compliant
operating systems, BIOS-based operating systems, and BIOS-based adapters as
well as UEFI-compliant adapters.
Note: The server does not support DOS.
The Integrated Management module (IMM) combines service processor
functions, video controller, and remote presence function in a single chip. The
IMM provides advanced service-processor control, monitoring, and alerting
function. If an environmental condition exceeds a threshold or if a system
component fails, the IMM lights LEDs to help you diagnose the problem, records
the error in the event log, and alerts you to the problem. The IMM also provides
a virtual presence capability for remote server management capabilities. The IMM
provides remote server management through industry-standard interfaces:
– Intelligent Platform Management Interface (IPMI) version 2.0
– Simple Network Management Protocol (SNMP) version 3
– Common Information Model (CIM)
– Web browser
The remote presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 85 Hz,
regardless of the system state
– Remotely accessing the server, using the keyboard and mouse from a remote
client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a
remote client, and mapping ISO and diskette image files as virtual drives that
are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server
as a virtual drive
The blue-screen capture feature captures the video display contents before the
IMM restarts the server when the IMM detects an operating-system hang
condition. A system administrator can use the blue-screen capture to assist in
determining the cause of the hang condition.
The Dynamic System Analysis (DSA) Preboot diagnostics programs are stored
on the integrated flash memory. It collects and analyzes system information to
aid in diagnosing server problems. The diagnostic programs collect the following
information about the server:
– System configuration
– Network interfaces and settings
– Installed hardware
– Light path diagnostics status
Advertisement
Table of Contents
