What Your Blade Server Offers - IBM 8038 Installation And User Manual

Table of Contents

Advertisement

Table 1. Features and specifications
Microprocessor: Supports up to two
multi-core Intel Xeon microprocessors.
Note: Use the Setup utility to
determine the type and speed of the
microprocessors in the blade server.
Memory:
v 12 dual inline memory module
(DIMM) connectors
v Type: Very Low Profile (VLP)
double-data rate (DDR3)
single-rank, dual-rank, or
quad-rank DRAM
v Supports 2 GB, 4 GB, 8 GB, and 16
GB DIMMs with up to 192 GB of
total memory on the system board
Integrated functions:
v Horizontal-compact-form-factor
(CFFh) expansion card interface
v Vertical-combination-I/O (CIOv)
expansion card interface
v Local service processor: Integrated
Management Module II (IMM2)
with Intelligent Platform
Management Interface (IPMI)
firmware
v Integrated Renesas SH7757 IMM2
video controller
v Integrated keyboard/video/mouse
(cKVM) controller through the
IMM2
v Light path diagnostics
v RS-485 interface for communication
with the management module
v USB 2.0 for communication with
cKVM and removable media drives
(an external USB port is not
supported)
v Serial over LAN (SOL)
v Wake on LAN (WOL)
v Redundant buses for
communication with keyboard,
mouse, and removable media
drives

What your blade server offers

Your blade server offers features, such as, the Integrated Management Module,
storage disk drive support, IBM
microprocessor technology, integrated network support, I/O expansion, large
system-memory capacity, light path diagnostics, PCI Express, and power throttling.
v Integrated Management Module II (IMM2)
6
BladeCenter HS23E Type 8038 and 8039: Installation and User's Guide
Predictive Failure Analysis (PFA)
alerts:
v Memory
v Storage drives (SAS only)
Electrical input: 12 V dc
Environment:
v Air temperature:
– Blade server on: 10°C to 35°C
(50°F to 95°F). Altitude: 0 m to
914.4 m (0 ft to 3000 ft)
– Blade server on: 10°C to 32°C
(50°F to 89.6°F). Altitude: 914.4
m to 2133.6 m (3000 ft to 7000
ft)
– Blade server off: 10°C to 43°C
(50°F to 109.4°F). Altitude: 914.4
m to 2133.6 m (3000 ft to 7000
ft)
– Blade server shipping: -40°C to
60°C (-40°F to 140°F)
v Humidity:
– Blade server on: 8% to 80%
– Blade server off: 8% to 80%
– Blade server storage: 5% to 80%
– Blade server shipment: 5% to
100%
v Particulate contamination:
Attention: Airborne particulates
and reactive gases acting alone or
in combination with other
environmental factors such as
humidity or temperature might
pose a risk to the server. For
information about the limits for
particulates and gases, see
"Particulate contamination" on
page 79.
The integrated management module II (IMM2) combines service processor
functions, video controller, the remote presence, and blue-screen capture features
in a single chip. The IMM2 provides advanced service-processor control,
Drives: Supports up to two hot-swap,
small form factor (SFF)
v Serial Attached SCSI (SAS) (enabled
when ServeRAID H1135 is installed)
v Serial ATA (SATA) (including
solid-state storage drives)
Size:
v Height: 24.5 cm (9.64 inches) (6U)
v Depth: 44.6 cm (17.56 inches)
v Width: 2.9 cm (1.14 inches)
v Maximum weight: 4.63 kg (10.2 lb)
®
Director, IBM Enterprise X-Architecture
®
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladecenter hs23e8039

Table of Contents