Table of Contents
Advertisement
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. See the documentation that comes with the adapter for any cabling instructions
4. Rotate the adapter-retention brackets to the open position.
5. Remove the expansion-slot cover.
6. If you are installing a full-length adapter, remove the blue adapter guide (if any)
68
IBM System x3500 M3 Type 7380: Installation and User's Guide
on page 35.
all external cables. Remove the left-side cover (see "Removing the left-side
cover" on page 57 for more information).
and information about jumper or switch settings. (It might be easier for you to
route cables before you install the adapter.)
from the end of the adapter. Otherwise, continue with the next step.
Adapter guide
Advertisement
Table of Contents
