Calibrating The Printer With Bi-D Calibration - Epson Stylus 1500 Setup Information Manual

5. Click Yes; then click OK.
6. Start a print job.
You see a dialog box similar to the following:
The print job listed under Printing is currently being printed.
Jobs listed under Waiting are queued to begin when the
current job is completed. To cancel a print job, click the name of
the job and then click Cancel Printing.

Calibrating the Printer with Bi-D Calibration

Your printer has been calibrated at the factory so that vertical
lines in your text and graphics are properly aligned. If you
notice misaligned images in printouts, however, you can
calibrate the printer with the Bi-D Calibration Utility. You may
need to do this after moving the printer to a new location, for
example.
3-2
Using the Printer Driver Utilities