Page Gap; Print Settings - Epson Stylus 1500 Setup Information Manual

Page Gap

Controls whether pages are ejected as they print. To eject a
page as it is printed, turn Page Gap on by clicking
on banner paper, click
Note:
To change the Page Gap setting, enter the Option dialog box from the
Page Setup dialog box. You cannot change the Page Gap setting if
you opened the Option dialog box from the Print dialog box.

Print Settings

The following settings control the resolution, media type, and
print options.
Printing Mode
Specifies the resolution to be 720 dpi, 360 dpi, or 180 dpi.
Resolution is the amount of detail used to create an image.
The higher the resolution, the sharper and finer the image.
For the best possible resolution, choose Super - 720 dpi. When
you select this resolution, MicroWeave is automatically turned
on and High Speed mode is turned off. For best results at
720 dpi, load EPSON special coated paper for 720 dpi or
high-quality glossy paper.
For most color printing, select Best - 360 dpi. This resolution
produces good-quality, full-color images using less memory
and in less time than 720 dpi. For best results at 360 dpi, use
EPSON special coated paper for 360 dpi.
When speed is important and draft quality is good enough, use
Draft - 180 dpi resolution.
Note:
Printing at lower resolutions also conserves ink.
to turn Page Gap off.
Installing and Using the Printer Driver
. To print
2-11