Epson Stylus 1500 Setup Information Manual page 55

Follow these steps:
1. Open the Stylus 1500 folder and double-click
Bi-D Calibration Utility.
2. You see a prompt asking you to choose how your printer is
connected. Click Network.
3. You see the Bi-D Calibration Utility screen. Select your
printer and print head [Printer Type, either Stylus 1500
(monochrome) or Stylus 1500 (color)] to be calibrated.
4. Make sure paper is loaded in the printer; then click the
Preview button to print a preview of all available
calibration patterns. Use these pages to select the patterns
that need to be calibrated.
Note:
If you want to stop printing the preview patterns, press Pause
and then turn off the printer using the Operate button.
5. For example, if the lines shown under Pattern 2 need to be
aligned, highlight Pattern 2 in the Choose Pattern pop-up
menu and then click Start.
Wait while the printer prints a page containing multiple
patterns of vertical lines, each assigned with an offset
value. In most patterns, the vertical lines are slightly
misaligned. Look for the pattern that is most closely
aligned.
|
|
Aligned
6. Enter the offset value of the pattern that is most closely
aligned in the No. box and click OK. Wait for the printer to
print the pattern Confirming Alignment Sheet for the offset
value you entered.
|
|
Not aligned
Using the Printer Driver Utilities
3-3