Micr Reader (When The Printer Is Used With The Micr Reader) - Epson TM-H5000II Series Manual

CONFIDENTIAL
Form stopper position
18.9
38.5
18
Slip feeding roller
position
Paper feed direction
Area where paper holes are prohibited
and reflection rate for the back of
paper should be 40% or more.
Paper feed direction
Figure 1.1.5 Paper Holes and Low Reflection Prohibited Area

1.1.6 MICR Reader (when the printer is used with the MICR reader)

1) Reading method: Magnetic bias
2) Recognition rating:
Recognition rating (%)
=
31
30.1
8
1.3
TOF sensor
position
Center of the print head
Slip side guide
BOF sensor
Figure 1.1.4 Slip Sensor Positions
15
98 % or more (at 25°C)
Recognition rating is defined as follows:
Total number of checks – (number of sheets misread or not identified.)
· Check paper used for test is Epson standard check paper.
· Checks must be flat, without curls, folds, or wrinkles.
· The magnet bias method is used for reading.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
MICR head
1.8
1.8
39
37.2
21.9
3.6
[Units: mm (All the numeric values are typical.)]
29
24
10
Paper holes and translucence
prohibited area.
[ Units: mm (All the numeric values are typical.) ]
Total number of checks
SHEET
REVISION
E
´ 100
NO.
SHEET
NEXT
7
8