Igmp Snooping Static Group Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
None – Click this option to not set these ports as router ports
Static – Click this option to designate a range of ports as being connected to a multicast-
enabled router. This command will ensure that all packets with this router as its destination will
reach the multicast-enabled router.
Forbidden – Click this option to designate a port or range of ports as being forbidden from
being connected to multicast enabled routers. This ensures that these configured forbidden
ports will not send out routing packets
Click Apply to implement the new settings. Click the
window.

IGMP Snooping Static Group Settings

This table is used to configure the current IGMP snooping static group information on the Switch.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Static Group Settings, as shown below.
The following parameters can be configured:
Parameter Description
VID
VLAN Name
IP Address
To search for an entry enter the appropriate information and click Find. To display all current entries on the Switch click View
All. To add a new entry, click Add, and the following window will be displayed.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 32 IGMP Snooping Static Group Settings window
The list of the VLAN IDs for which to create IGMP snooping static group information.
The name of the VLAN for which to create IGMP snooping static group information.
The static group address for which to create IGMP snooping static group information.
Show All Router Port Entries
168
link to return to the router Port Settings