Canon PowerShot SD100 Software Starter Manual page 55

To open a sound file already saved to the computer, click the
[Open] button in place of the [Record] button. Then skip to
Step 8.
5
Click the [Start] button.
Recording will start.
6
When the recording is complete, click the [Stop] button, followed by
the [Close] button.
Recording will stop after 30 seconds elapses even if the Stop button is not
clicked. In that case, just click the [Close] button.
The following window will appear.
Volume Control
Starting position of
sound (blue switch).
7
Click the [Sound Format] button as required and select a sound
format.
8
Edit the sound data so that it conforms to the time limits.
Adjust the time of the recording with the blue or red switch.
The extra data outside the starting and finishing switches can be erased by
clicking the [Cut] button.
Stop
Play
Finishing
position of
sound (red
switch)
Rewind
49