Powershot Sd100 Digital Elph/Digital Ixus Ii - Canon PowerShot SD100 Software Starter Manual
Software starter guide dc sd ver.12
Hide thumbs
Also See for PowerShot SD100:
- User manual (191 pages) ,
- Parts catalog (21 pages) ,
- Connection manual (76 pages)
Table of Contents
Advertisement
96
PowerShot SD100 DIGITAL ELPH/DIGITAL IXUS II
PowerShot SD100 DIGITAL ELPH/DIGITAL
IXUS II
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
2
Set the mode switch to
power lamp lights green.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 106) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•USB Mounter (Macintosh) is not supported.
USB Port
To the Digital
Terminal
USB Cable
and press the ON/OFF button until the
1. Slip a fingernail under the
terminal cover and lift to open.
2. Insert it all the way until it clicks.
Advertisement
Table of Contents
