Powershot G3 - Canon PowerShot SD100 Software Starter Manual

100

PowerShot G3

PowerShot G3
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Confirm that the camera's [Communication] setting is set to
[Normal].
2
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
The camera and computer will automatically be ready to transfer data
when a connection is established.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•Adobe Photoshop 5.0 LE
See Adobe Photoshop 5.0 LE CD-ROM (p. 108) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
All programs and features are supported
See the Camera User Guide for information about the
camera's Communication settings.
USB Port
USB Cable
USB Cable
1. Open the terminal cover by slipping a
fingernail in the groove and lifting.
2. Insert it all the way until it clicks.
To the Digital
Terminal