PowerShot S45
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Confirm that the camera's [Communication] setting is set to
[Normal].
See the Camera User Guide for information about the
camera's [Communication] settings.
2
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
The camera and computer will automatically be ready to transfer data
when a connection is established.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 2.0
See ArcSoft Camera Suite 2.0 CD-ROM (p. 104) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
All programs and features are supported
USB Port
USB Cable
1. Slip a fingernail under the terminal
cover and lift to open.
2. Insert it all the way until it clicks.
101
To the Digital
Terminal
USB Cable