Powershot S230 Digital Elph/Digital Ixus V3 - Canon PowerShot SD100 Software Starter Manual

102

PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v3

PowerShot S230 DIGITAL ELPH/DIGITAL
IXUS v
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Confirm that the camera's [Communication] setting is set to
[Normal].
2
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
3
Set the mode switch to the replay mode and turn the camera's
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 106) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•The My Camera function is not supported.
3
See the Camera User Guide for information about the
camera's [Communication] settings.
USB Port
USB Cable
DIGITAL • A/V OUT Terminal
2. Insert the connector with the
the camera and cable aligned.
1. Slip a fingernail
under the terminal
cover and lift to
open.
USB Cable
symbols on