Useful Information; Character Entry; Status Of The Unit - Panasonic DP-MC210 Operating Instructions Manual

10. Useful Information

10 Useful Information Useful Information

10.1 Character entry

The dial keypad is used to enter characters and
numbers.
– Press {<} or {>} to move the cursor.
– Press dial keys to enter characters and numbers.
– Press {Back} to erase the character or number
highlighted by the cursor. Press and hold {Back} to
erase all characters or numbers.
– To enter another character located on the same dial
key, press {>} to move the cursor to the next space,
then press the appropriate dial key.
Keypad
{1}
{2}
{3}
{4}
{5}
{6}
{7}
{8}
{9}
{0}
{#}
{Flash}
{Caller ID}
{Back}
To select characters using {V} or {^}
Instead of pressing the dial keys, you can select
characters using {V} or {^}.
1. Press {V} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Numbers
3 Symbols
4 Lowercase letters
L If you press {^}, the order will be reversed.
2. Press {>} to insert the displayed character.
3. Return to step 1 to enter the next character.
78
Characters
1 . _ – [ ] {
/ = , ` : ; ? |
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
P Q R S p q r
T U V t u v 8
W X Y Z w x y
0 @ ( ) < > !
$ % & ¥ @ ^ '
To switch between uppercase
and lowercase letters.
Hyphen
To insert a space.
To delete a character.

10.2 Status of the unit

10.2.1 Using Remote Control
You can easily operate the following functions from your
computer.
– Programming the features (page 60)
– Storing, editing or erasing items in directories (page
46)
– Storing or erasing items for broadcast transmission
(page 48)
– Viewing items in the journal report (page 46)
– Saving the journal report to your computer
– Viewing items in the Caller ID list (page 56)
} +
– Storing caller information into directories (page 57)
– Saving the Caller ID list on your computer
1
Start Multi-Function Station. i [Remote Control]
L The [Multi-Function Remote Control] window
will appear.
s 7
z 9
" #
→
2
Select the desired tab.
L The latest data in the unit will be displayed.
3
Perform the desired operation.
L For details about each function, click [Help].
L To stop the operation, click [Cancel].
4
[OK]
L You can also click [Apply] to continue the next
operation without closing the window.
5
Enter the password (feature #155 on page 60). i
[OK]
L The new data will be transferred to the unit and
the window will close.
Note:
L Some of the features cannot be programmed from
your computer.
L For details, see the help file by selecting [p] from
Multi-Function Station.
L When another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.