Basic Settings - Xerox C2424 - WorkCentre Color Solid Ink User Manual

Basic Settings

This section includes:
■ "Setting the Copy Default Tray" on page 3-4
■ "Specifying a Different Tray to Use" on page 3-4
■ "Selecting Color or Black and White Copies" on page 3-5
■ "Specifying 2-Sided Originals or Copies" on page 3-5
■ "Selecting the Quality of the Copies" on page 3-6
■ "Specifying the Original Type" on page 3-7
Setting the Copy Default Tray
To set the default paper supply tray for copy jobs:
1.
On the control panel, press the System Setup button.
2. Job Defaults
In the menu, select
3. Copy Defaults
Select
4. Paper Supply, then press the Enter button.
Select
5.
Scroll to the desired tray or
6.
Press the Enter button to save the changes.
Specifying a Different Tray to Use
In some cases, you may want to make copies on letterhead, colored paper, or transparencies.
After loading the special paper in the tray, select that tray for use for your copies. To do this:
1. On the control panel, press the Copy button.
2. In the menu, select Paper
Note
You can press the Paper Supply shortcut button on the control panel to skip Steps 1
and 2.
3.
Select one of the following trays to use for the copies, then press the Enter button.
Tray 1
■
■ Tray 2 (factory default value)
■ Tray 3 (if available on your system)
Tray 4
■ (if available on your system)
Note
For best results, specify the size and type of paper if using Tray 1. Specify the paper type if
using Tray 2, 3, or 4.
Setup, then press the Enter button.
Setup, then press the Enter button.
Auto Select.
Supply, then press the Enter button.
WorkCentre® C2424 Copier-Printer
3-4
Adjusting Copying Options