Sending By Ip-Fax - Ricoh Aficio MP 6000 Facsimile Reference Manual

Sending by IP-Fax

This section explains how to specify a destination using IP-Fax transmission.
When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address,
host name, or alias telephone number) in place of the fax number.
Important
❒ Specify the protocol to be used in [Select Line] in advance.
A
Make sure that [Fax] is selected.
B
Press [Manual Entry].
To select a destination from the Address Book, see "Using the Address Book
to Specify Destinations".
C
Enter the IP-Fax destination, and then press [OK].
If you enter an incorrect character, press [Backspace] or [Delete All]. Then, re-
enter the characters correctly.
To change the IP-Fax destination after pressing [OK], press [Edit Dest.], re-enter
an IP-Fax destination, and then press [OK].
Specifying a Destination
1
67