Chip Configuration - Asus P4G8X User Manual

4.4.1 Chip Configuration

SDRAM Configuration [By SPD]
This parameter allows you to set the optimal timings for items 2–5,
depending on the memory modules that you are using. The default setting
is [By SPD], which configures items 2–5 by reading the contents in the
SPD (Serial Presence Detect) device. The EEPROM on the memory
module stores critical information about the module, such as memory type,
size, speed, voltage interface, and module banks.
Configuration options: [User Defined] [By SPD]
The SDRAM parameters (items 2~5) become configurable only when
you set the SDRAM Configuration to [User Defined].
SDRAM CAS Latency
This item controls the latency between the SDRAM read command and
the time the data actually becomes available. Configuration options: [2.5T]
[2T] [1.5T]
SDRAM RAS to CAS Delay
This item controls the latency between the DDR SDRAM active command
and the read/write command. Configuration options: [3T] [2T].
SDRAM RAS Precharge Delay
This item controls the idle clocks after issuing a precharge command to
the DDR SDRAM. Configuration options: [3T] [2T]
ASUS P4G8X series motherboard user guide
(value depends on SDRAM SPD)
(value depends on SDRAM SPD)
(value depends on SDRAM SPD)
4-21