Asus P4G8X User Manual page 61

POST Message
No keyboard detected
No floppy disk detected
No IDE hard disk detected
CPU temperature too high
CPU fan failed
CPU voltage out of range
System completed Power-On Self Test • No action required
Computer now booting from operating • No action required
system
You may disable the ASUS POST Reporter™ in the BIOS setup. See
section "4.4.2 I/O Device Configuration".
ASUS P4G8X series motherboard user guide
Action
• Check your keyboard if properly
connected to the purple PS/2
connector on the rear panel.
• See section "1.4.1 Major
components" for the location of the
connector.
• Make sure you have connected a
floppy disk to the floppy disk
connector on the motherboard.
• See section "2.8 Connectors."
• Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
• See section "2.8 Connectors."
• Check CPU fan if working properly.
• Check the CPU fan and make sure
it turns on after you applied power
to the system.
• Make sure that your CPU fan
supports the fan speed detection
function.
• Check your power supply and
make sure it is not defective.
• Call ASUS technical support for
assistance. See the "ASUS contact
information" on page x.
3-3