Jumpers - Asus P4G8X User Manual

2.7

Jumpers

1. USB device wake-up (3-pin USBPW56)
Set this jumper to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode)
using the connected USB devices. Set to +5VSB to wake up from S3
and S4 sleep modes (no power to CPU, DRAM in slow refresh, power
supply in reduced power mode).
The rear panel USB ports (Ports 1 to 4) do not support device wake-up
from S4 sleep mode.
P4G8X
®
P4G8X USB Device Wake Up
2. Wireless PCI and USB settings (3-pin WPCI_USB)
These jumpers are reserved. DO NOT change the default settings.
P4G8X
®
P4G8X WPCI_USB Setting
ASUS P4G8X series motherboard user guide
USBPW56
1 2 2 3
+5V +5VSB
(Default)
WPCI_USB
3 1 5 3
4 2 6 4
Wireless Original
PCI_USB PCI
reserved pin
(Default)
2-17