Table of Contents
Advertisement
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
Select the Change User Password item and press <Enter>.
1.
2.
On the password box that appears, type a password composed of up to six letters
and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup]
[Always]
3-38
E5888_M4A88TD-V EVO-USB3_Content38 38
BIOS checks for user password when accessing the Setup utility.
BIOS checks for user password both when accessing Setup and booting
the system.
Chapter 3: BIOS setup
5/26/10 3:45:51 PM
Hide quick links:
Advertisement
Table of Contents
