Asus M4A88TD-V EVO/USB3 User Manual page 48

®
2. AMD SB850 Serial ATA Serial ATA 6.0 Gb/s connectors (7-pin SATA 1/2/3/5/6)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk
drives and optical disc drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5,
or RAID 10 configuration through the onboard AMD
M4A88TD-V EVO/USB3
M4A88TD-V EVO/USB3 SATA connectors
•
•
•
2-30
E5888_M4A88TD-V EVO-USB3_Content30 30
SATA6
These connectors are set to IDE mode by default. In IDE mode, you can connect
Serial ATA boot/data hard disk drives to these connectors. If you intend to create a
Serial ATA RAID set using these connectors, set the type of the SATA connectors to
[RAID] in the BIOS. See section 3.4.2 SATA Configuration for details.
®
You must install Windows XP Service Pack 2 or later version before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
®
Windows XP SP2 or later version.
When using hot-plug and NCQ, set the type of the SATA connectors to [AHCI] in the
BIOS. See section 3.4.2 SATA Configuration for details.
®
SB850 controller.
SATA5 SATA2
SATA3 SATA1
Chapter 2: Hardware information
5/26/10 3:44:56 PM