Asus M4A88TD-V EVO/USB3 User Manual page 52

7. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
M4A88TD-V EVO/USB3
M4A88TD-V EVO/USB3 Digital audio connector
The S/PDIF module is purchased separately.
8. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
M4A88TD-V EVO/USB3
M4A88TD-V EVO/USB3 Front panel audio connector
•
•
2-34
E5888_M4A88TD-V EVO-USB3_Content34 34
SPDIF_OUT
AAFP
HD-audio-compliant
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Select item in the BIOS setup to [HD Audio]; if you want to connect
an AC'97 front panel audio module to this connector, set the item to [AC 97]. By
default, this connector is set to [HD]. Refer to 3.6.3 Onboard Devices Configuration
for details.
PIN 1 PIN 1
Legacy AC'97
pin definition compliant definition
Chapter 2: Hardware information
5/26/10 3:45:03 PM