Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
3.
Press �Tab�� to switch between screen fields and use the �Up/Down/Home/End�� keys
to select the BIOS file and press �Enter��. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
•
3-8
E5888_M4A88TD-V EVO-USB3_Content8 8
Are you sure to update BIOS?
Yes
No
Load the BIOS default settings to ensure system compatibility and stability. Select the
Load Setup Defaults item under the Exit BIOS menu.
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Update ROM
Chapter 3: BIOS setup
5/26/10 3:45:26 PM