3.6.5
USB Configuration
The items in this menu allow you to change the USB-related features. Select an item and
press �Enter�� to display the configuration options.
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
[Enabled]
[Disabled]
The following items appear only when you set USB Support to [Enabled].
Legacy USB Support [Auto]
[Auto]
[Enabled]
[Disabled]
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed]
[HiSpeed]
3-30
E5888_M4A88TD-V EVO-USB3_Content30 30
Enables the USB Host Controllers.
Disables the controllers.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Enables the support for USB devices on legacy operating systems (OS).
Disables the function.
Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).
Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).
Chapter 3: BIOS setup
5/26/10 3:45:45 PM