Asus M4A88TD-V EVO/USB3 User Manual page 53

9. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
M4A88TD-V EVO/USB3
M4A88TD-V EVO/USB3 ATX power connectors
•
•
•
•
•
ASUS M4A88TD-V EVO/USB3
E5888_M4A88TD-V EVO-USB3_Content35 35
EATX12V
+12V DC
+12V DC
+12V DC
+12V DC
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 450 W.
Do not forget to connect the 4-pin/8-pin EATX12 V power plug; otherwise, the system
will not boot.
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.
asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power
or above to ensure the system stability.
EATXPWR
PIN 1
GND
+3 Volts GND
GND +12 Volts +5 Volts
GND +12 Volts +5 Volts
GND
+5V Standby +5 Volts
Power OK -5 Volts
GND GND
GND
+5 Volts
GND GND
+5 Volts PSON#
GND GND
+3 Volts -12 Volts
+3 Volts +3 Volts
PIN 1
2-35
5/26/10 3:45:05 PM