MSI MS 7005 - 651M-L Motherboard - Micro ATX User Manual page 73

MS-7005 Micro ATX Mainboard
Connecting the Speakers
When you have set the Multi-Channel Audio Function mode properly in
the software utility, connect your speakers to the correct phone jacks in
accordance with the setting in software utility.
2-Channel Mode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each
phone jack on the back panel when 2-Channel Mode is selected.
1 MIC
2 Line In
3 Line Out (Front channels)
4-Channel Mode for 4-Speaker Output
The audio jacks on the back panel always provide 2-channel analog
audio output function, however these audio jacks can be transformed
to 4- or 6- channel analog audio jacks by selecting the corresponding
multi-channel operation from No. of Speakers.
Refer to the following diagram and caption for the function of each
jack on the back panel when 4-Channel Mode is selected.
1 MIC
2 * Line Out (Rear channels)
3 Line Out (Front channels)
* Line In function is converted to
Line Out function when 4-Channel
Mode for 4-Speaker Output is
selected.
A-6
Back Panel
3
2
Back Panel
3
2 1
1