Installing And Removing The Sim Card - Palm P80505RGRS - Tungsten W Smartphone Handbook

Handhelds
Table of Contents

Advertisement

Appendix A Maintaining Your Handheld

Installing and removing the SIM card

With the SIM card installed, you can use your handheld's wireless features, such
as the mobile phone, SMS, and wireless e-mail. Without the SIM card, you can
operate your handheld, but you cannot use the wireless features.
If you have not installed your SIM Card, see the Getting Started that came with your
handheld or use the following instructions. Most likely, the SIM card either is in
your package or was handed to you by a representative of your wireless service
provider. In some cases the SIM card is already installed in your handheld by your
wireless service provider.
IMPORTANT
remove the SIM card before sending in your handheld. Use the following instructions
if you need to exchange or remove the SIM card.
To install the SIM card or verify installation:
If you have the SIM card attached to its plastic holder, carefully detach the SIM
1.
card from the holder.
On the back panel of your handheld, slide a thin, flat edge (similar to your
2.
thumb nail) in the indent and under the access door until the access door is
released.
374
If you are sending in your handheld for service to Palm, you must

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tungsten w

Table of Contents