Table of Contents
Advertisement
Chapter 21 Setting Preferences for Your Handheld
Creating a login script on your handheld
You can create login scripts by selecting commands from the Command pick list in
the Login Script dialog box. Some commands, such as Send, require you to supply
additional information. Those commands have a parameter field so that you can
add the necessary data.
To create a login script:
Tap Script.
1.
Tap the End pick list.
2.
Select the command you want from the Command list. If the command requires
3.
additional information, a field appears to the right of it for you to enter the
information. The following commands are available:
Wait For
Wait For
Prompt
Send
Send CR
Send User ID
Send
Password
356
Tap here
Tells your handheld to wait for specific characters from the
TCP/IP server before executing the next command.
Detects a challenge-response prompt coming from the server
and then displays the dynamically generated challenge value.
You then enter the challenge value into your token card, which
in turn generates a response value for you to enter on your
handheld. This command takes two arguments, separated by a
vertical bar (|) on the input line.
Transmits specific characters to the TCP/IP server to which you
are connecting.
Transmits a carriage return or LF character to the TCP/IP server
to which you are connecting.
Transmits the user ID information entered in the User ID field of
the Network Preferences screen.
Transmits the password entered in the Password field of the
Network Preferences screen. If you did not enter a password,
this command prompts you to enter one. The Password
command is usually followed by a Send CR command.
Advertisement
Table of Contents
