Toro 20330 - Low Wheel Walk Power Mower Service Manual page 60

SINGLE SPEED BEVEL GEAR TRANSMISSION
11. Remove klip ring, keyed thrust washer, and standard
thrust washer (left side of mower has the standard
thrust washer, right side does not) (Fig. 098).
12. Remove the snap ring, pivot arm and spring arm
(Fig. 099).
3-22
Fig 098 PICT-1915a
Fig 099 PICT-1921a
13. Push the bearings and bearing retainers inward,
towards the transmission (Fig. 100).
14. Unhook the traction cable from the transmission belt
guide (Fig. 101 and Fig 102).
Fig 100 MVC-297
Fig 101 PICT-1923
WPM Drive Systems Manual