Toro Bos Control Cable Adjustment; Lawn-Boy Bcs Control; Lawn-Boy Bcs Control Cable Adjustment - Toro 20330 - Low Wheel Walk Power Mower Service Manual

HANDLES AND CONTROL CABLES

Toro BOS Control Cable Adjustment

The blade clutch control is adjusted by removing the
cover between the engine and bag door. Loosen the
cable clamp and draw the cable to the rear to remove
the slack. Now push the cable outer jacket forward 5/8"
(1.5cm) and secure. This will create 5/8" (1.5cm) slack in
the cable (Fig. 268).

Lawn-Boy BCS Control

To engage the blade clutch, press the control button.
Then pull the control bar to the handle. To disengage the
blade, release the control bar. (Fig. 269).
7-18
Fig 268 MVC-BOS457x
Fig 269 lwpm_10797a

Lawn-Boy BCS Control Cable Adjustment

Lawn-Boy Insight and Insight Gold:
1. Remove the grass bag and tunnel (Fig. 270).
2. Loosen cable clamp. Draw cable to rear to remove
slack. Now push outer jacket of cable forward 5/8"
(1.5cm) and secure. This will create 5/8" (1.5cm)
slack in the cable (Fig. 271).
Fig 270 DSC-5360a
Fig 271 DSC-5357a
WPM Drive Systems Manual