Table of Contents
Advertisement
Onboard Devices Configuration
The parameters in this screen are for advanced users only. You do not need
to change the values in this screen because these values are already
optimized.
The Onboard Devices Configuration sub-menu assigns resources to basic
computer communication hardware.
The following table describes the parameters in this sub-menu. Settings in
boldface are the default and suggested parameter settings.
Parameter
Serial Port
Enables or disables the serial port.
When enabled, you can set the base I/O
address and interrupt request (IRQ) of the
serial port.
IrDA Port
Enables or disables the infrared port.
When enabled, you can set the base I/O
address, interrupt request (IRQ) and
direct memory access (DMA) channel of
the infrared port.
Chapter 2
Description
Options
Enabled or
Disabled
3F8h, 3E8h, 2F8h
or 2E8h
4 or 11
Enabled or
Disabled
2F8h, 3E8h, 3F8h,
or 2E8h
3 or 10
49
Advertisement
Table of Contents
