Table of Contents
Advertisement
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Note: If your system has ACPI, all power management functions are
taken care of by Windows .
Parameter
Advanced Power
Management Mode
Turn Off Display
Turn Off Hard Disk
System Standby
System Hibernation
After Standby
System Resume
Timer Mode
Battery-low Warning
Beep
Sleep Upon Battery-
low
Chapter 2
Description
Enables or disables
Advanced Power
Management (APM) mode
Sets the time-out value
before the display enters
power saving mode.
Sets the time-out value
before the hard disk enters
power saving mode.
Sets the time-out value
before the computer enters
Standby mode.
Sets the time-out value
before the computer enters
Hibernation mode.
When enabled and the
system resume date and
time are valid, the computer
resumes (wakes up) at the
set time and date.
Enables or disables warning
beeps during a battery-low
condition
Enables or disables the
hibernation function during a
battery-low condition
When the computer is very
low on battery power, the
computer will enter
hibernation mode if Sleep
Manager is installed, active
and the hibernation file is
valid.
Options or Format
Disabled , Enabled or
time values
Disabled or time
values
Disabled or time
values
Disabled or time
values
Disabled or time
values
Disabled or Enabled
DD/MM/YYYY (day/
month/year)
HH:MM:SS
(hour:minute:second)
Enabled or Disabled
Enabled or Disabled
53
Advertisement
Table of Contents
