Onboard Devices Configuration
The Onboard Devices Configuration screen contains
parameters settings for your hardware connection devices.
Caution: The parameters in this screen are for
advanced users only. You do not need to change the
values in this screen because these values are
already optimized.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Parameter
Serial Port
Base Address
IRQ
Chapter 5 Software
Description
Enables or disabled the serial port.
Options: Enabled or Disabled
Sets the I/O address of the serial port.
Options: 3F8h, 2F8h, 3E8h or 2E8h
Sets the interrupt request of the serial port.
Options: 4 or 11
BIOS Utility
89