Back to Contents Page
Drives
Dell™ OptiPlex™ GX280 Systems User's Guide
General Installation Guidelines
Hard Drive
Front-Panel Inserts
Floppy Drive
CD/DVD Drive
Cable Routing
Your computer supports:
One serial ATA hard drive
l
One optional floppy drive
l
One optional CD or DVD drive
l
1 CD/DVD drive
2 floppy drive
3 hard drive
General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the
the
system
board.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a data cable—to the back of the drive and to the system board.
Drive Interface Connectors
IDE Drive Connector
Serial ATA Connector
1 interface connector
system
board. Serial ATA hard drives should be connected to the connector labeled "SATA0" on