Dell GX280DT - GX280 Desktop Computer User Manual page 201

1 PCI Express x16 card
2 PCI Express x16 card slot
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see
PCI Express Card."
If you are replacing a card, remove the current driver for the card from the operating system.
If you are installing or replacing a PCI card, see
Installing a PCI Express Card
1. Follow the procedures in "Before You
2. Press the lever on the card retention arm and raise the retention arm.
1 securing slot (not all cards) 6 retention arm
2 edge connector 7 lever
3 card connector 8 PCI Express x16 card
4 card opening 9 securing tab
5 filler bracket
3. If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 5.
4. If you are replacing a card that is already installed in the computer, remove the card.
If necessary, disconnect any cables connected to the card. Gently pull the securing tab, grasp the card by its top corners, and ease it out of its
connector.
5. Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your
computer.
CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be
sure to unplug your computer from its electrical outlet before installing any cards.
"Installing a PCI Card."
Begin."
"Removing a