Removing A Hard Drive; Installing A Hard Drive - Dell GX280DT - GX280 Desktop Computer User Manual
User guide
Hide thumbs
Also See for GX280DT - GX280 Desktop Computer:
- Quick reference manual (108 pages) ,
- Setup manual (15 pages)
Table of Contents
Advertisement
NOTICE:
To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently
cushion it.
NOTE:
If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.
Check the documentation for the drive to verify that it is configured for your computer.
Removing a Hard Drive
1. Follow the procedures in
"Before You
2. Disconnect the power and hard-drive cables from the drive. Disconnect the hard-drive cable from the system board.
1 hard-drive cable
2 hard-drive cable on system board
3 power cable
3. Press in on the blue tabs on each side of the drive and slide the drive up and out of the computer.
1 hard drive
2 tabs (2)
Installing a Hard Drive
1. Unpack the replacement hard drive, and prepare it for installation.
2. Check the documentation for the drive to verify that it is configured for your computer.
Begin."
Advertisement
Table of Contents
