1. If you are replacing a floppy drive, remove the shoulder screws from the old drive and attach the screws to the replacement drive.
2. If you are installing a new floppy drive, remove the drive-panel insert, remove the shoulder screws from the inside of the drive-panel insert and attach
the screws to the new drive.
1 drive
2 shoulder screws (4)
3. Gently slide the drive into place until you hear a click or feel the drive securely installed.
1
floppy drive
2
shoulder screws (4)
3
shoulder screw slot
4. Attach the power and floppy-drive cables to the floppy drive.