Back to Contents Page
Drives
Dell™ OptiPlex™ GX280 Systems User's Guide
General Installation Guidelines
Hard Drive
Front-Panel Inserts
Floppy Drive
CD/DVD Drive
Cable Routing
Your computer supports:
One serial ATA hard drive
l
One optional floppy drive
l
One optional CD or DVD drive
l
1 CD/DVD drive
2 floppy drive
3 hard drive
General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the
"SATA1" on the
system
board.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a data cable—to the back of the drive and to the system board.
Drive Interface Connectors
IDE Drive Connector
Serial ATA Connector
system
board. Serial ATA hard drives should be connected to the connectors labeled "SATA0" or