Symantec 10547829 - Mail Security For Smtp 5.0 Smb Installation Manual page 36

36 Installing Symantec Mail Security for SMTP
Setting up
To register the Scanner
1 On the License Registration page, click Browse to find your .slf file.
2 Select your .slf file and click Open to return to the License Registration page.
3 If your Scanner will be using a proxy server for communications with
Symantec, check the Use HTTP Proxy box and complete the proxy
configuration fields.
4 Click Register.
If registration was successful, the License Registration page is redisplayed.
If there was an error, you will see error text at the top of the page.
Note: For registration and ongoing operations, Symantec Mail Security for
SMTP communicates with Symantec Security Response over a secure
connection. If registration has failed, ensure that your network is
configured to permit outbound connections to Symantec on port 443.
5 If you have another .slf file for a different feature, repeat this procedure.
6 When all your .slf files are successfully registered, click Next.
7 Continue with "To specify mail filtering
To specify mail filtering settings
1 On the Mail Filtering panel, specify how you will use this Scanner.
You can choose to filter inbound mail, outbound mail, or both inbound and
outbound mail.
If you choose to filter inbound mail, you will see the Inbound Mail
■
Filtering panel. Click Next and proceed with step 2.
If you choose to filter outbound mail only, you will see the Outbound
■
Mail Filtering panel. Click Next and proceed with
mail filtering settings"
2 On the Inbound Mail Filtering panel, choose the IP address to use for
inbound mail.
You can use the Test button to ensure that the mail server responds.
3 If desired, change the port specification for inbound mail, and then click
Next.
4 On the Inbound Mail Filtering - Connections panel, specify the mail servers
from which this Scanner will accept inbound mail.
You can choose All IP addresses or specify IP addresses or hostnames. A
typical choice would be All IP addresses, thus allowing the Scanner to
accept mail from any MTA on the Internet.
settings" in the next section.
on page 37.
"To specify outbound