Symantec 10547829 - Mail Security For Smtp 5.0 Smb Installation Manual page 41

To log in as an end user with an iPlanet or Sun ONE Directory Server
Note: To do this, LDAP authentication must be enabled. Refer to the Symantec
Mail Security for SMTP Administration Guide for more information on LDAP
support.
1 Access your Control Center from a browser.
The default login address is:
https://
<hostname>
where
<hostname>
the Control Center. You can also use the IP address in place of
You may see a security alert message.
2 If you see a security alert message, accept the self-signed certificate to
continue.
The Control Center log in page is displayed.
3 If necessary, choose the language in which you want to operate the Control
Center.
Below the text entry fields you will see a list of names of languages. The
name of the language currently in use is displayed in normal text. The
names of other languages are displayed underlined and highlighted. Click
the name of another language to use that language instead.
4 In the User name box, type your full email address (for example,
kris@example.com).
5 In the Password box, type the password you normally use to log in to your
system.
6 Click Login.
To log in as an end user with an Active Directory account
1
Access your Control Center from a browser.
The default login address is:
https://
<hostname>
where
<hostname>
the Control Center. You can also use the IP address in place of
You may see a security alert message.
2 If you see a security alert message, accept the self-signed certificate to
continue.
The Control Center log in page is displayed.
3 If necessary, choose the language in which you want to operate the Control
Center.
Installing Symantec Mail Security for SMTP
:41443/
is the hostname of the machine on which you installed
:41443/
is the hostname of the machine on which you installed
Accessing the Control Center
<hostname>
<hostname>
41
.
.