26 Installing Symantec Mail Security for SMTP
Installing on Windows
Typical, which installs both the Scanner and Control Center on the
■
same machine in a location you specify, with subcomponents under
that location, or
Custom, which allows you to install a Scanner or the Control Center
■
individually, as well as specify locations for the MTA data and log
directories (if you are installing a Scanner), and/or the port number for
your Tomcat installation (if you are installing the Control Center).
4
Select a configuration option and click Next.
The Installation Directory panel is displayed.
5
Click Browse to specify an alternate location, or accept the default value,
and then click Next.
The default value is
C:\Program Files\Symantec\SMSSMTP
If you selected the default configuration in step 4, the Installation
■
Parameters Summary panel is displayed. Proceed to step 12.
If you selected the custom installation configuration in step 4, the
■
Feature Selection panel is displayed. Proceed to step 7.
6
If you are installing both a Scanner and the Control Center, click Next,
otherwise, uncheck the box for the component you are not installing, and
then click Next.
7
If you are installing the Control Center only, proceed to step 11.
If you are installing a Scanner, the MTA Data Directory panel is displayed.
This is the directory used for message queue data. The default location for
this directory is
C:\Program Files\Symantec\SMSSMTP\mta
8
Click Browse to specify an alternate location, or accept the default value,
and then click Next.
The Log Directory panel is displayed. All log data for this Scanner will be
stored in the directory you specify. The default location for this directory is
C:\Program Files\Symantec\SMSSMTP\logs
9
Click Browse to specify an alternate location, or accept the default value,
and then click Next.
If you are installing both a Scanner and the Control Center on this
■
machine, proceed to step 12.
If you are installing a Scanner individually (with no Control Center on
■
this machine), the Control Center IP panel is displayed. You must
provide either the specific IP address (or CIDR range of IP addresses) of
a Control Center allowed to access this Scanner, or you can allow access
to this Scanner from any computer.