Note : This set can be disassemble according to the following sequence.
Set
Block Assy, Bottom
Note : Follow the disassembly procedure in the numerical order given.
3-1. BLOCK ASSY, BOTTOM
Note : When installing, fit the knobs (HOLD, SYNCHRO REC) and switches (S804, S807)
2
4 screws (1.4)
3-2. PANEL BLOCK ASSY, UPPER
SECTION 3
DISASSEMBLY
Panel Block Assy, Upper
Main Board
MD Mechanism Deck
S804
S807
knob (HOLD)
5
1 lid, battery case
4 screws (1.4)
3
LCD Module
Service Assy, OP
Motor Flexible Board
Motor, DC (M602)
"Motor, DC (M601)", "Motor, DC (M603)"
knob (SYNCHRO REC)
3 screws (1.4)
6 block assy, bottom
hinge
block assy, bottom
Note:When installing the bottom block assy,
lid, battery case
6 panel block assy, upper
2
– 8 –
Holder Assy
install the assy with the battery case lid open.
After it is installed, close the battery case lid.
1 CN801
5 screws (1.4)