Sound Skip Check Result Display Mode - Sony MZ-R70 Service Manual

4-5. SOUND SKIP CHECK RESULT DISPLAY MODE

This set can display and check the error count occurring during
record and play.
• Setting method of Sound Skip Check Result Display
Mode
1. Setting the test mode. (See page 13)
[REC]
2. Press the or key on the set activates the sound skip
N
check result display mode where the LCD displays as shown
below.
[REC]
When N or key on the set is pressed:
LCD display
Total of play system error count
3. When key or
N N >
pressed, the total of error count is displayed on the LCD, and
key is pressed, the error count descents
each time the >
one by one as shown below. Also, when
the error count ascends by one. If
pressed, the error count during record is displayed.
: Sound skip check items counter (hexadecimal)
: 6-digit address (hexadecimal) where a sound skipped
last
Total of record system
error count
key on the remote commander is
key is pressed,
.
[REC]
key on the set is
[REC]
4. When key on the set is pressed, the total of error count
is displayed on the LCD, and each time the
the error count descents one by one as shown below. Also,
when . key is pressed, the error count ascends by one.
If key is pressed, the error count during play is displayed.
N
: Sound skip check items counter (hexadecimal)
: 6-digit address (hexadecimal) where a sound skipped
last
Error code
Cause of error
EIB
Stat
Playback
Adrs
BEmp
BOvr
Recording Bful
Rtry
5. Quit the sound skip check result display mode, and press
the key to return to the test mode (display check mode).
x
– 16 –
key is pressed,
>
Description of error
Sound error correction error
Decorder status error
Cannot access the address
Buffer becomes empty
Buffer becomes full and sounds are
dumped
Buffer capacity lowers and data are
forcibly written
Retry count over