Manual Mode - Sony MZ-R70 Service Manual

4-2-4. Configuration of Test Mode
[Test Mode $Display Check Mode%]
1)
Press the * or
>
3)
Press the * key
x
3)
Press the * or
.
3)
Press the * key
x
1)
Press the N * or
3)
Press the * key
x
[Sound Skip Check Result Display Mode]
[DISPLAY]
press the
3)
Press the * key
x
[T MARK]
Press the
on the remote commander for several seconds.
Quit the key check or open the upper panel
Note: *1) on the set
*2) on the remote commander
*3) on the set or remote commander

4-3. MANUAL MODE

Mode to adjust or check the operation of the set by function.
Normally, the adjustment in this mode is not executed.
• Transition method in Manual Mode
1. Setting the test mode. (See page 13)
[VOL +]
2. Press the or
>
where the LCD display as shown below.
LCD display
3. The optical pick-up moves outward or inward while
the or key is pressed for several seconds respec-
> .
tively.
4. Each test item is assigned with a 3-digit mode number;
100th place is a major item, 10th place is a medium item, and
unit place is a minor item.
[VOL +] 3)
* key
[Manual Mode]
[Servo Mode]
[Audio Mode]
[Power Mode]
[OP Alignment Mode]
[VOL --] 3)
* key
[Overall Adjustment Mode]
[REC] 1) 2)
* or N > * key
2) 1)
* or MENU * key
.
[Self-Diagnosis Display Mode]
3) [DISPLAY] 2)
* or * key
[Key Check Mode]
key activates the manual mode
[Major item switching]
N key x key
[Medium item switching]
N key x key
[Minor item switching]
– 14 –
[VOL +]
key:100th place of mode number
increase.
[VOL --]
key:100th place of mode number
decrease.
[VOL +]
key:10th place of mode number
increase.
[VOL --]
key:10th place of mode number
decrease.
key: Unit place of mode number
N
increase.
[Adjusted value variation]
[VOL +]
key:Increases the
adjusted value
[VOL --]
key:Decreases the
adjusted value
[Adjusted value write]
key: When adjusted value is
X
changed:
Adjusted value is written.
When adjusted value is
not changed:
That item is adjusted
automatically.