Sony STR-DH520 Service Manual

SERVICE MANUAL

Ver. 1.0 2011.01
This receiver incorporates Dolby* Digital and Pro Logic Surround and the
DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic,
and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &
pending. DTS and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This receiver incorporates High-Definition Multimedia Interface (HDMI™)
technology. HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
"x.v.Color (x.v.Colour)" and "x.v.Color (x.v.Colour)" logo are trademarks
of Sony Corporation.
"BRAVIA" is a trademark of Sony Corporation.
"Playstation" is a registered trademark of Sony Computer Entertainment
Inc.
9-890-559-01
Sony Corporation
2011A80-1
©
2011.01 Published by Sony EMCS (Malaysia) PG Tec
STR-DH520
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(US model only)
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 90
watts per channel minimum RMS power, with no more than 0.09% total
harmonic distortion from 250 milliwatts to rated output.
Amplifi er section
1)
US model
Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)
2)
Surround Mode Output Power
CND, ECE, UK, AUS and TW models
Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)
2)
Surround Mode Output Power
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Taiwan Model
90 W + 90 W
100 W + 100 W
(8 ohms, 1 kHz, THD 10%)
130 W per channel
1)
85 W + 85 W
100 W + 100 W
(8 ohms, 1 kHz, THD 10%)
130 W per channel
– Continued on next page –