Remote Control; Input Buttons - Sony STR-DH540 Operating Instructions Manual

Remote control

Use the supplied remote control to operate
this receiver and other equipment. The
remote control is assigned to operate Sony
audio/video equipment. You can reassign
the input button to match the equipment
connected to your receiver (page 66).
RM-AAU168
A ?/1 (on/standby)
Turns the receiver on or sets it to the
standby mode.
Saving the power in standby mode
When "Control for HDMI" (page 59)
and "Pass Through" (page 60) are set
to "Off".
14
GB
1)
B TV ?/1
(on/standby)
Turns the TV on or sets it to the
standby mode.
C Input buttons
Selects the equipment you want to use.
When you press any of the input
buttons during standby mode, the
receiver turns on. The buttons are
assigned to control Sony equipment.
1)
D TOP MENU
Opens or closes the BD-ROM's or
DVD's Top Menu.
1)
REPEAT
Plays a track or a folder repeatedly.
POP UP/MENU
Opens or closes the BD-ROM's
Pop-up Menu, or the DVD's menu.
1)
SHUFFLE
Plays a track or a folder in random
order.
E
+/–
Selects a folder.
F AMP MENU
Displays the menu to operate the
receiver.
1)
G
V/v/B/b
,
Press V/v/B/b to select the menu
items, then press
the selection.
1)
H OPTIONS
Displays and selects items from the
options menu.
1)
I HOME
Displays the home menu on the TV
screen.
1)
J ./>
, m/M
1)
x
Skip, backward/forward, play, pause,
stop operation.
1)
TUNING +/–
Scans a station.
D.TUNING
Enters direct tuning mode.
1)
PRESET +/–
Selects preset stations or channels.
1)
1)
to enter/confirm
1) 1) 1)
, N , X ,